MPA-2 | Kele | Transducers

Supply Voltage: 24 VAC ±10% or 24 VDC ±10%

Supply Current:

120 mA maximum @ 24 VAC

50 mA Maximum @ 24 VDC

Dip Switches: Sliding window size is DIP switch-selectable for 5-, 15-, or 30-minute periods; kWh pulses to produce full-scale output are DIP switch selectable from 10 pulses per period to 18,000 pulses per period

Input Signal:

24 VAC/VDC switched through electronic or mechanical contact closure

Input Current 15 mA non-inductive at 24V

Max Pulse Rate 10 pulses/seconds

Output Signal: 4-20 mA factory set, adjustable 0-20 mA zero and span; 2-10 VDC factory set, adjustable 0-18 VDC (both outputs can be used simultaneously)

Output Impedance: Maximum output resistance 650Ω for mA output; maximum current available from voltage and current outputs combined is 25 mA

LED Indication:

Green status LED (L2)

Steady green = normal

Slow flashing green = calibration mode

Rapid flashing green = kW demand overflow

Red signal LED (L1) = contact closure on the utility meter kWh contacts (LED is off when contacts open)

Note: L3 and L4 stay ON during operation

Mounting: 3.25" (8.3 cm) snap track (supplied with unit)

Dimensions: 3.25"H x 4.6"W x 1"D (8.3 x 11.7 x 2.54 cm):

Weight: 0.39 lb (0.17 kg)

Warranty: 18 months