69378 | Peco | Thermostats & Controllers
PECO Programmable Fan Coil Thermostat
Brand:Peco
MPN:69378
SKU:TA180-001
product series specifications
- Supply Voltage:
- 24-277 VAC @ 1 VA, ±10%, 50/60 Hz
- Setpoint:
- 50° to 90°F (10° to 32°C), adjustable
- Sensor Type:
- Built-in 10K thermistor Type II
- Remote Sensor:
- 10K thermistor Type II, acc. required
- Output Control:
- 6-SPST relays
- :
- H/C/Damper, Fan-L/M/H
- Output Amps:
- (put spec table here)
- :
- Note: Combined load not to exceed 20A
- Control:
- Proportional plus Integral (PI)
- Dead-band:
- 3°F, (1.6°C)
- Setback (H/C):
- 55° to 90°F (13° to 32°C), adjustable 8°F (4.4°C) minimum separation
- Keypad Lockout:
- All buttons disabled except setpoint
- Display:
- 1" x 1.5" backlit digital display Room temp., setpoint, system and fan status
- Display Offset:
- ±9°F (5°C), in 1°F (0.5°C)
- increments:
- Button Controls:
- :
- Up, Down Temperature select
- :
- System Heat/Cool/Auto/Off/Setback
- :
- Fan Control On Hi-Med-Lo/Auto Hi-Med-Lo
- :
- Program Clock-°F/°C -Set-Copy-Hold
- Switch Cycles:
- 100,000 cycles
- Termination:
- 6" flying leads 18-14 AWG
- Color:
- White
- Mounting:
- Horizontal on wall. Screw direct or 4" x 4" back box
- Operating Temperature:
- 130°F (54°C)
- Operating Humidity:
- 98% RH non-condensing
- Enclosure Rating:
- NEMA 1, Vinyl plastic
- Dimensions:
- 4.4"H x 5.8"W x 1.4"D
- :
- (11.2 x 14.7 x 3.5 cm)
- Approvals:
- UL File# E50023 and ADA compliant
- Warranty:
- 5 year
- :
product series features
- 7-day, 4-event schedule
- 1H/1C and On-Off vent damper
- H/C/A/O system switching
- Fan switch Auto/On/Off
- L/M/H manual fan speed or fan staging models
- 24-277 VAC power
- Large backlit ADA compliant display/buttons
- Occupancy motion detector inputs
- Door switch or setback input
- Remote sensor and service alert input
- Change over sensor input
- Keypad lockout
- 2-pipe or 4-pipe operation
- Setback from occupancy or clock
- Temperature or continuous set point display
- Temperature offset display
- Setpoint limits, H and C
- Fan off delay
- H/C setback selection
- Easy occupant switched °F or °C display
more information & related documents
Series Description
The Peco T180 Series is a 7-day, 4-event programmable FCU thermostat. The large ADA compliant backlit display shows temperature °F or °C with a simple push of a button and indicates fan and system status. The T180 is powered from 24-277 volts with direct-wired manual fan or auto-staging fan models. Remote temperature sensor, pipe changeover sensor, setback input and occupancy sensor inputs are all standard.
Kele Description
7 DAY PROG, 3 SPD 24-277VAC FC STAT
Manufacturer
Peco
Related Documents
T180 Datasheet x
