T5100-LED | Telaire/Amphenol | Gas & Specialty Sensors

Supply Voltage: 18 to 30 VAC RMS, 50/60 Hz or 18 to 42 VDC, polarity protected.

Signal Output:

T5100-V: 0 to 5V or 0 to 10V Field Configurable (100 OHM output impedance)

T5100-I: 4 to 20mA (RL maximum 500 OHM)

T5100-LED: 0 to 5V, 0 to 10V, 4-20mA Field Configurable (100? output impedance) / Or 4 to 20 mA (RL maximum 500?)

Power Consumption: Typical 0.7 W at nominal voltage of 24V AC RMS

Signal Update: Every 5 seconds

Accuracy: ±30 ppm or 3% of the reading shown, whichever is higher* (*C02 accuracy statement excludes standard gas used for calibration that has an accuracy of 2%. In addition, there is a potential digital to analog error of up to 2%.)

Stability: <2% of FS over life of sensor (15 years)

Temperature Dependence: 0.2% FS per °C (±0.11% per °F)

Measurement Range: 0 to 2000 ppm

Sensing Method: Non-dispersive infrared (NDIR) absorption, Gold-plated optics, Patented ABC Logic self calibration algorithm

Calibration Interval: None, uses ABC (Automatic Background Calibration)

Warm Up Time: <Two minutes (operational); 10 minutes to achieve maximum accuracy

Pressure Dependence: 0.135% of reading per mmHg

Operating Humidity: 0 to 95% relative humidity, non-condensing

Operating Temperature: 0°C to 50°C (32°F to 122°F)

Storage Temperature: -40°F to 158°F (-40°C to 70°C)

Dimensions: 4.58"H x 3.20"W x 1.01"D (116.40 x 81.40 x 25.69 mm)

Weight: 0.5 lb

Approvals: CE, RoHS, REACH and WEEE compliant

Warranty: 24 months on mechanical defects, Calibration - lifetime warranty (ABC Logic on.)