LDIM2 | Kele | Lighting Controls
Electronic Dimmable Ballast Controller Snap-Track Mount
Brand:Kele
MPN:LDIM2
SKU:LDIM2
97 in stock
product specifications
Mount
Snap Track
Type
Dimming Controller
Supply Voltage (Nominal)
24 VAC
product series specifications
- Supply Voltage:
- 24 VAC ±10% @ 250 mA
- Signal Input:
- 0-10 VDC, 2-10 VDC @ 50KΩ, or
- :
- PWM contact(Adj. Timebase) 0.1 to 25.6 seconds
- Signal Output:
- Light dimming, 0-10 VDC, sinking, 0.5A Max
- :
- Fuse 1A fast blow (20 x 5 mm Fuse. GF-1)
- :
- Isolation Output signal Isolated from Input signal
- :
- Fail Safe Max 10V out on input signal loss
- Manual Override:
- 40% to 100% (DIP switch adjustable)
- Feed Back:
- Requires 24VDC @ ‚Ä=Power IN‚Ä= terminal
- :
- Setpoint 4-20 mA (Sourcing), @650Ω
- :
- Output Signal 4-20 mA (Sourcing), @650Ω
- Set-Up:
- 8 DIP switches (Adj. on the fly)
- Visual Indication:
- Three Status LED's
- :
- LED 1 (RED) Output feedback loop (dim to bright)
- :
- LED 2 (RED) Setpoint feedback loop (dim to bright)
- :
- LED 3 (GRN) Off = No PWR, Solid On = normal,
- :
- Blinking = See below
- Operating Temperature:
- 14° to 122‚Ñâ (-10° to 50‚ÑÉ)
- Operating Humidity:
- 5 to 95% RH non-condensing
- Wiring Terminations:
- 8-Terminals, 22 to 14 AWG wire
- :
- 2 Ballast Signal Terminals, 22 AWG to 10 AWG
- Mounting:
- Snap Track, (3.25 x 6") Included
- Dimensions:
- 3.25‚Ä=W x 5‚Ä=L x 1.8‚Ä=H
- :
- (8.25 x 12.7 x 4.57 cm)
- Weight:
- 0.75 lb (0.34 Kg)
- Warranty:
- 2 years
product series features
- Control output 0-10 VDC dimmable fluorescent ballasts or LED driver modules
- BAS Setpoint (0, 2-10V or PWM)
- 4-20 mA feedback for light level setpoint and output monitoring
- Output is electrically isolated from input
- Fail-safe, output to full-bright on lost signal
- Manual override of setpoint input
- 3.25 in x 5.00 in. snap-track mount
more information & related documents
Series Description
The Kele Model LDIM2 is a fluorescent/LED dimming control for dimmable electronic fluorescent ballasts/LED driver module. It is designed for single 0-10V dimming output with a 0-10V input or a PWM input from controllers. Feedback is provided for light level setpoint and light level output. The LDIM2 output interfaces with electronic fluorescent ballasts/LED driver modules designed for an analog 0-10V sinking input.
Kele Description
ELECTRONIC DIMMABLE BALLAST CONTROLLER SNAP-TRK MT
Manufacturer
Kele
x
