EXP-C-48 | RLE Technologies | Network & Wireless
FMS Expansion Card; 24 DI (48VDC FMS models only)
Brand:RLE Technologies
MPN:EXP-C-48
SKU:EXP-C-48
product specifications
Type
Expansion Card
product series specifications
- Power:
- :
- FMS-X 24VDC Model: 24VDC (±10%), 1A max., power supply included; 48VDC Model: 36-72VDC, 0.5A max.
- :
- FMS-XXXX 24VDC Model: 24VDC (±10%), 2.5A max., power supply included; 48VDC Model: 36-72VDC, 1.25A max.
- Inputs:
- :
- Analog/Digital 8 Configurable as 4-20mA (12-bit A/D conversion) or Dry Contact NO/NC (<25mA)
- :
- Internal Temperature/Humidity ±0.5?F (@ 25?C), ±4?F (@ -40? to 185?F); ±3%RH (@ 20% to 80%RH); (Internal Temperature/Humidity optional)
- :
- Keypad Standard 3x4; 3000VAC RMS optically isolated; 20 User Access Codes (also accessible via phone/DTMF through modem)
- Outputs:
- :
- Relay 2 Dry Contact, Form C, 1A @ 24VDC, 0.5A resistive @ 120VAC (controllable via user programmable logic)
- :
- Sensor/Accessory Power 24VDC (±10%) @ 300mA max. (power for external sensors and/or devices)
- Expansion Cards:
- :
- 24V requires EXP-x-24 option cards; 48V requires EXP-x-48 option cards
- EXP-A-24 or EXP-A-48:
- 12 analog (jumper selectable for 4-20mA, 0-5VDC or 0-10VDC) or digital normally open dry contact inputs (non-isolated, individual ground only); 8 Form C Relay Outputs, 1A @ 24VDC, 0.5A resistive @ 120VAC. 48V FMS accepts only 1 EXP-A card.
- EXP-C-24 or EXP-C-48:
- 24 digital normally open or normally closed dry contact inputs, 3000VAC RMS optically isolated (common or individual ground)
- Communication Ports:
- :
- Ethernet 10/100BaseT, RJ45 connector; 500VAC RMS isolation
- :
- RS-232 DB9 female connector; 9600 baud; 3000VAC RMS optically isolated; 15kV ESD protection
- :
- EIA-485 (selectable as RS-232) Two-wire half duplex; terminal block (selecting RS-232 switches to DB9 male connector); 1200, 2400, or 9600 baud configurable; 3000VAC RMS optically isolated
- :
- Modem (RJ11 Telco; optional) V.34bis/33.6 kbps; DTMF capable; PPP-enabled; FCC Part 68 approved; 1500VAC RMS isolation barrier; 2100V peak surge protection
- Protocols:
- TCP/IP; UDP/IP; ICMP/IP; FTP; NTP;:
- IPv4
- HTTP/HTML; SNPP; Telnet:
- 1.1/4.0; up to 10 URL links to other IP addressable cameras/devices; webpages comply with Rehabilitation Act of 1973, sections 504 and 508, US Dept. of Education (website accessibility for computer users with disabilities)
- SNMP:
- V1: MIB-2 compliant; NMS Manageable with Get, Set, and Traps; V2c: Traps or Informs
- SMTP (email):
- Supports Client Authentication (plain and login); compatible with ESMTP Servers
- Modbus:
- RTU transmission protocol; function codes: slave - 03; master - 01,02,03,04
- Modbus/IP:
- Modbus Slave; TCP/IP transmission protocol; Reads up to 628 registers and converts to SNMP and BACnet
- BACnet/IP:
- Reads up to 106 instances and converts to SNMP and Modbus
- Terminal Emulation:
- VT100 compatible
- TAP (Pager):
- Telocator Alphanumeric Protocol v1.8
- Alarm Notification:
- Pager (Modem) – Optional:
- 15 text, numeric, or alphanumeric pager numbers; each digital and analog alarm (HighLimit and LowLimit) can notify any 5 of the 15 pagers
- Email (Ethernet, Modem PPP):
- 8 email recipients; email sent on Alarm and Return To Normal; each alarm can notify any or all of the 8 email recipients
- SNMP Traps (Ethernet):
- V1 and V2c: 8 Community Strings; V3 (optional): 4 users, 4 Trap Destinations
- Escalation:
- Additional notification to 1 of the 15 pager numbers when the initial page results in a Failure To Acknowledge status
- Self-Monitoring:
- Self resetting; captured in Event Log
- Internal Hardware:
- Real Time Clock:
- Battery backed; ±1.53 min/month accuracy
- Memory:
- 16MB RAM; 128K NVRAM; 16MB Flash
- Logging Capabilities:
- :
- Alarm Log Last 256 Alarms
- :
- Event Log Last 100 Events (e.g., Acknowledgement By Code, System Boot, Page Successful, etc.)
- :
- Web User Access Log Last 100 HTML Accesses (User, Date, and Time)
- :
- Digital Status Log Last 100 Digital Status entries
- :
- Trending of Analog Inputs 244 entries per time frame, per channel. High, low, and average values logged over specific minutes, hours, and days.
- Extended Trending (Analog Inputs):
- 3,840 entries over 32 inputs, physical or over Modbus. Logging at defined, user-selectable intervals.
- Login Security:
- Web Browser Access (Ethernet, Modem PPP):
- 1 Administrator plus 7 users individually selectable for Read Only, Read/Write or Administrator
- Terminal Emulation Access (Modem):
- 1 Administrator (password for Modem access)
- Front Panel Interface:
- 1 on/off power switch. Red and green LEDs indicate status, network link, network activity, and modem activity
- Operating/Storage Environment :
- :
- Operating temperature 32° to 158°F (0° to 70°C)
- :
- Humidity 5% to 95% RH, non-condensing
- :
- Altitude 15,000ft (4,572m) max.
- :
- Storage temperature -40? to 185?F (-40? to 85?C)
- Dimensions:
- :
- FMS-X 16.8"W x 1.8"H x 7.9"D (427mmW x 46mmH x 201mmD)
- :
- FMS-XXXX 16.8"W x 3.5"H x 7.9"D (427mmW x 89mmH x 201mmD)
- Weight :
- :
- FMS-X 6 lbs. (2.72kg)
- :
- FMS-XXXX 10 lbs. (4.54kg)
- Mounting:
- Rack mount; wall mount brackets available (not included)
- Approvals:
- CE; ETL listed: conforms to UL 61010A-1, EN 61010; certified to CAN/CSA C22.2 NO. 1010.1; RoHS compliant
product series features
- Accommodating up to 104 hardwired inputs (form in.C in. dry contacts, 4-20mA, 0-5VDC and 0-10VDC inputs)
- 32 integrated slave devices with as many as 1,000 values (accepts SNMP/Modbus/BACnet)
- 10 IP links
- 34 relay outputs for integration into other monitoring systems or control functionality
- Data trending and extended logging
- User configurable interactive graphical facility mapping
- PUE/DCIE monitoring
more information & related documents
Series Description
The Falcon Facilities Monitoring System (FMS) provides additional equipment protection by monitoring critical operating parameters in enterprises, remote network facilities, communication rooms, remote and unmanned facilities, and critical support systems. The FMS is a stand-alone system. It operates via embedded firmware that handles all data collection, alarm reporting, and multiple concurrent communication mediums. The FMS typically monitors analog, dry contact, Modbus, and SNMP integer outputs from a variety of devices. During operation, the FMS performs internal diagnostics and monitors its status. It uses LED indicators to report its condition. The FMS embedded firmware enables system configuration, I/O setup, status inquiries, alarm reports, data logs, and troubleshooting. The FMS is menu driven and operates with any Web browser, ASCII terminal, or terminal emulation application (HyperTerminal). A base FMS unit ships in a 1U rack-mount enclosure. Up to four expansion cards can be added to the base FMS to increase the functionality of the device. The 1U enclosure has room for one expansion card, in addition to the base FMS unit. A 2U FMS has room for three expansion cards, in addition to the base FMS functionality.
Kele Description
FALCON FMS "C" EXPANSION CARD 24 DI
Manufacturer
RLE Technologies
Falcon FMS Configuration Worksheet 5.0 x
