Power Supply: 4 Wire Flying Leads –

12-30VDC/24VAC, 1W max, 100mA max.

POE power to Sensor: 24vdc 5W max.

Analog Inputs: 2 Programmable Inputs –

0-10V and 4-20mA (selectable)

LED: Red

Normal Mode:

Off = Not Configured

Steady = No Connection

Slow Blink = Connected to device

Fast Blink = Connected to cloud service

Setup Mode:

Off = Button Held (Hold for 3 seconds)

Slow Blink = Commissioning Mode

Fast Blink= Hold to Initiate Factory Reset

Ethernet - RJ45:

10/100 BASE-TX

IPV4 Static or DHCP

IPV6 Static or Dynamic via DHCPv6 or SLAAC

BACnet/IP, Modbus/TCP (~ 100 Points Maximum)

Cloud Service Connection (~20 Points Maximum)

Wi-Fi: 2.4 GHz

AP Mode:

Supports Open, WPA2, WPA-WPA2 Mixed, WPA3, WPA2-WPA3 Mixed networks

IPV4 DHCP or Static IP

One client Wi-Fi Connection with configurable password

Uses Fixed IP for access point during initial setup WPA2-PSK (AES)

30M Range, in unimpeded areas.

Station Mode:

Supports Open, WPA2, WPA-WPA2 Mixed, WPA3, WPA2-WPA3 Mixed networks

IPV4 Static or DHCP

IPV6 Static or Dynamic via DHCPv6 or SLAAC

Configurable SSID lookup

Auto-reconnect after network or power loss

BACnet/IP, Modbus/TCP (~ 100 Points Maximum)

Cloud Service Connection (~20 Points Maximum)

30M Range, in unimpeded areas.

Operating Environment:

Operating Temperature: - 40 to 158ºF (-40 to 70ºC)

Storage Temperature: - 40 to 185ºF (-40 to 85ºC)

Humidity: 0 to 95% RH (non-condensing)

Altitude: 3,000 Meters

Enclosure:

Wi-Fi Model: ~1" H X 1" W X 0.5" D

RJ45 Model: ~2.4" H X 1" W X 1" D

RJ45 POE Model: ~2.4" H X 1" W X 1.1" D