SST2630A | ACI | Network & Wireless

Supply Voltage: 1 or 2, Lithium 3.0V 1400 mAh

Batteries: Duracell, DL123A, (Included)

Battery Life:4-5 years @75 second interval

Sensor Type: Temperature, 20K-2 thermistor internal

Probe length: Stainless Steel, ¼" dia x 2” length

CL2P Cable (Cable length per order)

Transmitted Range Value:

SST2630A: Overall Range, 40° to 200‚Ñâ, (-40° to 93‚ÑÉ)

Transmitted Accuracy:

Temperature: ±1.0°F (±0.55°C)

Indication:

LED on Transmit and data link conformation

LED on Low battery

A/D resolution: 12 bit (4095 counts)

Mounting: Direct to wall w/tabs

Wiring: None

Operating Temperature: 14° to 140°F (10° to 60°C)

Operating Humidity: 5 to 65% RH (non-condensing)

Construction: Polycarbonate (NEMA 4), ABS (NEMA 1)

Enclosure Rating: NEMA 4 (UL 94 5VA), NEMA 1 (UL 94 HB)

Dimensions: 1.75"H x 3.00"W x 5.75"D, Probe ø 0.25" (4.44 x 7.92 x 14.6 cm)

Weight: 1.2 lb (0.54 kg)

Warranty: 1 year

Radio Transmitter:

Protocol: Proprietary (ACI), IEEE 802.15.4-2003/2006

Data-Link LED confirms receiver reception

Frequency: 902-928 MHz

Channel Network: 1

Modulation: Direct Sequence Spread Spectrum (DSSS)

Transmit Power: 11.2 mW (11 dBm)

Receiver Sensitivity: -110db

Open Air Range: 5,280 ft (1,600m) Open air

Low Battery Indication: Yes, LED

Transmission time:20ms

Transmission Interval: 75 seconds standard, (Can be factory programmed at 300 sec)

Antenna: Internal

Channels: One

Device Addresses: 100 transmissions per minute

Programming: Program cable & laptop (free SW)

Repeater Capable: Yes, (can increase open air range x2)

Compliance: FCC ID# T4F061213RSO, RoHS