MIDAS-E-HCN | Honeywell Analytics | Gas & Specialty Sensors
Hydrogen cyanide (HCN) Midas Sensor Cartridge
Brand:Honeywell Analytics
MPN:MIDAS-E-HCN
SKU:MIDAS-E-HCN
product series specifications
Supply Voltage: 24 VDC -15% to 10% @ 208 mA
Signal Output: 3 alarm relays, 1A @ 30 VDC or 0.5A @ 125 VAC, 4-20 mA @ 250 O
Repeatability: ±5% of measured value
Linearity: ±2% of measured value
Measurement Range: 9-100 ppm
Gases Detected: Ammonia (NH3)
Sensing Technology: Single-pass, infrared non-dispersive
Coverage: 10' (3 m) sampling and exhaust provided, 100 ft (30 m) maximum
Warm Up Time: <10 minutes
Response Time: 2 to 30 seconds depending on sample tube length
Operating Temperature: 32° to 104°F (0° to 40°C)
Operating Humidity: 15% to 90% RH non-condensing
Enclosure Rating: NEMA 1
Dimensions: 5.9 in H x 12.6 in W x 6 in D (15 x 6.5 x 15.3 cm)
Weight: 1.8 lb (0.8 Kg)
Approvals: ETL, CE
Warranty: 2 years
product series features
- Three alarm levels with N.O. or N.C. alarm contacts
- 4 digit display status indication
- 4-20 mA output signal
- 10 foot (3m) sampling tube and exhaust included
- Visual alarm indication
- Local indication of current and peak gas levels
- NEMA 1
- Modbus/TCP communication protocol
more information & related documents
Series Description
The Honeywell Analytics MIDAS-K-NH3 Series Single Zone Ammonia Gas Monitor is designed for single point monitoring of ammonia gas with up to 100 ft (30 m) maximum distance from measuring point to monitor. The unit features a digital display for local indication of current gas levels and peak value. Included is three relay outputs. The MIDAS-K-NH3 provides a system fault relay output and a 4 to 20 mA output for integration with remote monitoring equipment or building management systems. The MIDAS-K-NH3 is designed to be used as part of a control system that helps to prevent the formation of a hazardous environment when properly installed and maintained.
Kele Description
MIDAS CARTRIDGE HCN
Manufacturer
Honeywell Analytics
Related Documents
Midas Part Numbers 
