KCOP-R-H-10PPM | Kele | Gas & Specialty Sensors
Carbon Monoxide Sensor, Relay Output, Hinged-Cover Enclosure, 10/20 ppm Relay Settings
Brand:Kele
MPN:KCOP-R-H-10PPM
SKU:KCOPRH10PPM
product specifications
Application
Commerical Building, Industrial Site, Hospital, Mine, Aircraft
Measurement Range
0 - 200 ppm
Display
No
Output Signal
Current
product series specifications
Supply Voltage: 20-30 VAC @ 5 VA or 24 VDC @ 200 mA, 50/60 Hz (KCOP)
Supply Voltage: 20-30 VAC @ 26 VA or 24 VDC @ 1.1 A, 50/60 Hz (LT Option)
Accuracy: ±2.5% full scale (KCOP)
Accuracy: ±4% full scale (LT Option)
Signal Output:
KCOP-R: Two SPDT relay contacts, 240 VAC, 2A resistive
KCOP-A: 4-20 mA @ 600O
Measurement Range: 0-200 ppm
Sensing Technology: Electrochemical
Calibration: Recalibrate with 25 ppm CO gas
Visual Indication:
Status Green: Power on, microprocessor operating properly
Yellow: Warning
Red: Alarm
Warm Up Time: Under 15 minutes
Response Time:
KCOP (all): 30 Seconds to warning
KCOP-R: 13 minutes to alarm
Sensor Life Expectancy: Approximately 5 years
Relay Setpoints: Warning/alarm: 10/20 ppm, 25/50 ppm or 50/100 ppm, jumper selectable, (KCOP-R only) (5-10 ppm DIF)
Operating Temperature: 32° to 122°F (0° to 50°C) (KCOP)
Operating Temperature: -22° to 122°F (-30° to 50°C) (LT option)
Operating Humidity: 5% to 99% noncondensing
Dimensions: 6.50"H x 6.0"L x 2.13"D (16.5 x 15.2 x 5.4 cm)
Weight: KCOP-A: 3.5 lb (1.6 kg), KCOP-R: 4.0 lb (1.8 kg)
Warranty: 1 year
product series features
- LED power indication
- 4-20 mA or dual relay output
- Replaceable sensor
- Sensor end of life indication
- Jumper selectable warning/alarm levels (KCOP-R)
- Heavy-duty enclosures with hinge- or screw-cover
- Low-temperature option available -22 degrees F (-30 degrees C)
- Temperature compensated
more information & related documents
Series Description
The Kele KCOP Series Carbon Monoxide Detectors are designed to detect CO and monitor CO levels in parking garages, loading docks, factories, warehouses, transportation terminals and more. Designed for use in Building Automation Systems, BAS, and HVAC systems, these carbon dioxide monitoring units are available with 4-20 mA output or dual relay output for designated warning and alarm CO levels. Each CO detector features a tri-color LED which illuminates green to indicate the unit is powered and functioning properly. On the relay output models, the LED will illuminate amber and red for warning and alarm status. A red LED indicates that the carbon dioxide sensor needs to be replaced. The microprocessor-based electronics are housed in a rugged, steel enclosure with hinged- or screw-covers. A low-temperature option is available for colder climates. When properly installed and maintained, KCOP Carbon Monoxide Detectors can be used as part of a control system to help prevent the formation of a hazardous environment. For more information on the proper application and use of this product please read 'Environmental Safety Devices' in our technical reference section.
Kele Description
CO DETECTOR RELAY HINGE 10PPM
Manufacturer
Kele
Related Documents
KCOP Installation Manual 
