Universal Ground Bar System

6-port ground bar: UGB2/0-414-6

12-port ground bar: UGB2/0-414-12

18-port ground bar: UGB2/0-414-18

Isolation standoffs: UGB-IN-SO

Bonding standoffs: UGB-B-SO

Recommended Connectors for Main Equipment Ground Conductor, Maximum 2/0 AWG

Copper Mechanical with Anti-Rotation:

#14 - 2/0 AWG: CLMAR2/0-14-Q

Two-Hole Copper Compression, 1/4" Stud Hole with 5/8" Spacing; #14 to 2/0 AWG

#14 - 10 AWG: LCA10-14A-L

#8 AWG: LCD8-14A-L

#6 AWG: LCD6-14A-L

#4 AWG: LCD4-14A-L

#2 AWG: LCD2-14A-Q

#1 AWG: LCD1-14A-E

1/0 AWG: LCD1/0-14A-X

2/0 AWG: LCD2/0-14A-X

One-Hole Copper Compression, 1/4" Stud Hole; #14 to 2/0 AWG

#14 - 10 AWG: LCA10-14-L

#8 AWG: LCAS8-14-L

#6 AWG: LCAS6-14-L

#4 AWG: LCAS4-14-L

#2 AWG: LCAS2-14-Q

#1 AWG: LCAS1-14-E

1/0 AWG: LCAS1/0-14-X

2/0 AWG: LCAS2/0-14-X

Recommended Connectors for Port Connections

Ring Terminals, 1/4" Stud Hole, Maximum Width of 0.55"; #22 to #4 AWG: Ring terminals available with vinyl, nylon, KYNAR*, high-temp, or heavy-duty insulation or non-insulated.

Compression Connectors, Maximum Width of 0.55"; up to #4 AWG Typical

Ferrules, Minimum Pin Depth of 12mm; #14 to #6 AWG:

*KYNAR is a registered trademark of Atofina Chemicals, Inc.

Performance Level

UL 467 Listed and CSA 22.2 Certified for grounding and bonding an equipment grounding conductor up to 2/0 AWG; meets UL 508A requirements

Main:Provides a location for the main equipment grounding conductor using a compression or mechanical connector.

Wire Ports:Accept bare stripped copper wire from #14 to #4 AWG. Accept wire ferrules from #14 AWG to #6 AWG

Top of ground bar accepts ring terminals, compression connectors, or mechanical connectors with a º" stud hole size and a maximum width of 0.55"

Materials:Ground bars and bonding stand-offs precision machined from 110 electrolytic copper with a 99.9% copper content and then tin-plated for additional corrosion resistance

Packaging:Each part is provided with all fasteners required for terminating wires and for each mounting option