95UVS4-1 | Fireye | Combustion Control & Flame Safety

UV flame scanner with 12-pin quick disconnect. Independently adjustable Flame Relay, 21 choices of modulation frequency, adjustable sensor gain, adjustable flame relay ON/OFF thresholds, a 4-20 mA analog output, Fault Relay, four selectable programmable files (e.g. for different fuels or firing rates), and Auto Config capability with manual override. Two line by 16-character alphanumeric OLED display with five push-buttons for programming. NEMA 4X enclosure.

Brand:Fireye

MPN:95UVS4-1

SKU:95UVS4-1

List Price:

$15,550.00

Today's Price:

$8,086.00

Lead time of > 15 days. Chat with Kele experts now

product specifications

Type

Flame Scanner

Used With

Fireye Insight-IV Flame Detector

product series specifications

MECHANICAL:

Housing Material: Cast aluminum with gray polyester powder coat finish

Housing Weight: 5.9 lbs (2.69kg), 13.2 lbs (5.98kg) “CEX” models, flange additional

Environmental: NEMA 4X, IP66

Area Classification: 95XXS4-1WINC, 95XXS4E-1WINC, 95XXS4-1: Class I Div 2, Groups A, B, C, D, Class II Div 2, Groups F & G 95XXS4-1CEX: Ex d IIC T6

Mounting: Requires one of two threaded mounting flanges, ordered separately

Mounting Flanges: Contains an integral heat-insulating female thread insert (heat insulating nipple not required)

Flange Threads:

P/N 60-2919-1 1”NPT female pipe mount with 3/8” NPT female cooling air connection

P/N 60-2919-2 1”BSP female pipe mount with 3/8” BSP female cooling air connection

Mounting Flange Weight: 0.62 lbs (0.28kg)

Cooling / Purge Air Requirements:

Source: Clean, dry cool

Volume: 4 SCFM (113 l/min) at 3/8” threaded mounting flange, or 1 inch “Y” fitting, mounted on scanner sight pipe. Temperature near the upper limit of the scanner operating range and/or use with dirty/dusty fuels may require up to 15 SCFM (425 l/min)

Temperature Rating: -40° to +150°F (-40°C to +65°C)

Humidity: 0% to 95% relative humidity, non-condensing

ELECTRICAL:

Input Power: 24 Vdc, +10%, -15% supply current .025 A, 6.0 VA

Electrical Connection: 12-pin screw type quick-disconnect (non-CEX). “CEX” models have internal terminal blocks

Relay Output: FLAME RELAY, SPST (N.O.) ; FAULT RELAY, SPST (N.C.)

Contact Rating:

Minimum: 10mA @ 5 Vdc (All models)

Maximum: 2A @ 30 Vdc, 2A @ 50V Vdc (Series 4E-1WINC models only)

Maximum 2A @ 30 Vdc; 2A @ 230 VAC (All other models)

Analog Output: Two, 4-20 mA dc current, referenced to 24 Vdc common, maximum connected load: 750 ohms

Operator Interface: Alpha -Numeric Display with five pushbutton keys

product series features

Available with infrared or ultraviolet sensors
21 modulation frequency choices
Two-line 16-character alphanumeric OLED display with a five button keypad
Electronic self-checking (no mechanical shutter)
Cable lengths available up to 295 feet

more information & related documents

Series Description

InSight Series 4 uses advanced techniques for discrimination and integrates flame detection, amplification, safety determination, and flame switch functions into a single detection head. The scanner measures the amplitude of the modulations (the flame "flicker") that occur within the targeted flame. During the scanner setup procedure, scanner chooses the modulation frequency that yields the best flame On/Off discrimination.

Kele Description

INSIGHT IV UV FLAME SCANNER. QUICK DISCONNECT. NEMA 4X,FM, UL/C APPROVED. USE 59-547-XX CABLE.

Manufacturer

Fireye