![CEP4015](https://assets.kele.com/product-assets/kmc-controls/skus/cep-4002/images/484_lwg_cep-4002.jpg)
CEP-4015 | KMC Controls | Actuators & Dampers
Controller: VAV, 45 in-lbs, 100 deg, CW Close, No Sensor
Brand:KMC Controls
MPN:CEP-4015
SKU:CEP4015
List Price:
$539.00
Today's Price:
$280.28
product specifications
Torque
45 in-lb
Supply Va
9 VA
Control Signal
Analog
Supply Voltage (Nominal)
24 VAC
product series specifications
- Supply Voltage:
- 24 VAC -15/+20%, 50/60 Hz, Class 2
- Supply Power:
- 9 VA
- Output Supply:
- 9.1 VDC (22 mA)
- Output Torque:
- 45 ±10 in-lbs. (5 ±1 N‚Ä¢m)
- Temperature Limits:
- Operating:
- 40 to 120‚Ñâ (4 to 49‚ÑÉ)
- Shipping:
- -40 to 140‚Ñâ (-40 to 60‚ÑÉ)
- Velocity Range :
- 0–3000 fpm (15.24 m/s)
- Velocity Deadband :
- ±50 fpm
- Velocity Output:
- 1-5 VDC (0-3000 fpm)
- Reset Voltage:
- 3-6 VDC (0-3000 fpm)
- Angular Rotation:
- 45°, 60°, 100°, 360°
- Stroke Time:
- 18° per minute @ 60 Hz, 15° per minute @ 50 Hz
- Connections:
- Plated screw terminals
- Mounting:
- Direct to 1/2" (13 mm)diameter shaft or with an HFO-0011 adaptor to 3/8" (10mm) diameter shaft
- Material:
- Glass-filled nylon
- Weight:
- 1.75 lb. (0.79 kg)
product series features
- Actuator section has magnetic clutch
- Available with built in stops or no stops
- Temperature compensated hot-wire anemometer
more information & related documents
Series Description
The CEP-4000 Series is a pressure-independent combination controller-actuator designed primarily for use on variable air volume terminal units. Cooling and heating air flow is sensed by a temperaturecompensated hot-wire anemometer. Velocity sensing is unaffected by changes in the duct air temperature. The CEP-4000 series offers full-range flow control\nof VAV terminal units when used with the CTE-1000/1100/5000 series room thermostats. Air-velocity flow control limits are set at the room thermostat or remotely with the REE-1012 remote-limits accessory module. The actuator section provides a magnetic clutch that allows the actuator to be stalled at either end of stroke, eliminating the requirement for mechanical\nstops or end switches. The controller-actuator is available with (100, 60, and 45 degrees) built-in stops or (360 degrees) no stops. Combined with available REE-1000/4000 series accessory modules, the controllers provide proportional or multi-position electric or hot-water reheat, cooling/heating changeover, and dual-duct applications.
Kele Description
KREUTER ACTUATOR
Manufacturer
KMC Controls
Related Documents