CEP-4011 | KMC Controls | Actuators & Dampers

Controller: VAV, 45 in-lbs, 100 deg, CW Close, SSE-1001

Brand:KMC Controls

MPN:CEP-4011

SKU:CEP-4011

List Price:

$-.--

Today's Price:

$-.--

product datasheet

installation instructions

Lead time of 0 days. Chat with Kele experts now

product specifications

Supply Va

9 VA

Supply Voltage (Nominal)

24 VAC

product series specifications

Supply Voltage: 24 VAC -15/+20%, 50/60 Hz, Class 2

Supply Power: 9 VA

Output Supply: 9.1 VDC (22 mA)

Output Torque: 45 ±10 in-lbs. (5 ±1 Nm)

Temperature Limits:

Operating: 40 to 120 °F (4 to 49 °C)

Shipping: -40 to 140 °F (-40 to 60 °C)

Velocity Range: 0-3000 fpm (15.24 m/s)

Velocity Deadband: ±50 fpm

Velocity Output: 1-5 VDC (0-3000 fpm)

Reset Voltage: 3-6 VDC (0-3000 fpm)

Angular Rotation: 45°, 60°, 100°, 360°

Stroke Time: 18° per minute @ 60 Hz, 15° per minute @ 50 Hz

Connections: Plated screw terminals

Mounting: Direct to 1/2" (13 mm) diameter shaft or with an HFO-0011 adaptor to 3/8" (10mm) diameter shaft

Material: Glass-filled nylon

Weight: 1.75 lb. (0.79 kg)

product series features

Actuator section has magnetic clutch
Available with built in stops or no stops
Temperature compensated hot-wire anemometer

more information & related documents

Series Description

The CEP-4000 Series is a pressure-independent combination controller-actuator designed primarily for use on variable air volume terminal units. Cooling and heating air flow is sensed by a temperaturecompensated hot-wire anemometer. Velocity sensing is unaffected by changes in the duct air temperature. The CEP-4000 series offers full-range flow control\nof VAV terminal units when used with the CTE-1000/1100/5000 series room thermostats. Air-velocity flow control limits are set at the room thermostat or remotely with the REE-1012 remote-limits accessory module. The actuator section provides a magnetic clutch that allows the actuator to be stalled at either end of stroke, eliminating the requirement for mechanical\nstops or end switches. The controller-actuator is available with (100, 60, and 45 degrees) built-in stops or (360 degrees) no stops. Combined with available REE-1000/4000 series accessory modules, the controllers provide proportional or multi-position electric or hot-water reheat, cooling/heating changeover, and dual-duct applications.

Kele Description

ELEC.CONT.100 DEG.CWWSSE-1001

Manufacturer

KMC Controls