Schneider Ecostruxture Panel Assembly (EPA) through Kele

The EPAs can be purchased without controllers in any combination.  You will, however, lose the cost benefit associated with the standard controller through the EPA program. But, you will be able to control the timing of the installation at the job site and/or to use a controller option not covered by the EPA program.

No, EPAs cannot be purchased with multiple controllers in Prometheus or as a standard. However, you can use a base EPA design in a larger enclosure and get a custom addition quote. (Note: The one controller rule does not pertain to adding modules.)

Kele will generate an iPortal report that shows the parts selected for your EPA panel.  You can then load that report into iPortal to see your exact pricing.

You do not personally need Prometheus to order an EPA panel. Kele has a working version of Prometheus that we use to generate drawings on your behalf and an associated report that you can import in iPortal to create an order.

You can start the process using Prometheus OR Kele will use our version of Prometheus to generate drawings on your behalf to generate the associated report that you can then import to iPortal to create an order.

Please note, all EPA orders must go through Schneider Electric. Kele cannot sell systems products and therefore cannot enter an EPA panel order for you.

• 12″ x 12″
• 20″ x 20″
• 24″ x 24″
• 32″ x 24″
• 39″ x 24″
• 39″ x 32″
• 48″ x 32″

Yes. 750, 1000, and 1500 UPS versions are available. They can be purchased as a standalone accessory (PNLU-ACC-750, PNLU-ACC-1000, PNLU-ACC-1500) or as part of the power selections with an external power option chosen.

Depending on size, up to five power selections can be added. Selections consists of up to four 100VA transformers and an option for one DC power supply ranging from 7.5, 15, 30, 60, or 90W.

Yes, tagging is accomplished through numbering sequence printed on wires. 

It’s all about space. Each option selected fits into a zone. The easiest way to free up space in a zone is to select the No Terminal (NT) option. This will require you to wire directly to the controller in the field but will allow most controller options to fit in a smaller versions of the enclosure.

No, but most are available, including many of the legacy controllers. It’s easy to see the selectable versions in Prometheus. Plus, if they are available in EPAs, they are stocked at Kele to reduce lead time.

Yes, the Schneider Electric logo (sticker) ships unattached on the inside of the box. The door is reversible, so we leave the logo (sticker) loose to make sure it reads correctly in the field.  As a Schneider Electric partner, you do have the ability to select and receive your custom logo for use on the EPA panel as well. Ask your Kele representative for details.